Bolt anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers, and ladders outside.

To all Variants
Advantages
  • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
  • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.
FBN II 10/15 A4 Art.-No. 091563
— 
10 [mm]
83 [mm]
86 [mm]
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 83 [mm]
Anchor length
l
 86 [mm]
Max. usable length hef,max./hef,min. — 
Thread
Ø x length
 M 10 x 51 [mm]
Width across nut 17 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209915639 
To product variant
FBN II 10/20 E Art.-No. 062913
— 
10 [mm]
83 [mm]
86 [mm]
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 83 [mm]
Anchor length
l
 86 [mm]
Max. usable length hef,max./hef,min. — 
Thread
Ø x length
 M 10 x 51 [mm]
Width across nut 17 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209629130 
To product variant
FBN II 10/50 Art.-No. 062914
— 
10 [mm]
118 [mm]
126 [mm]
50/60 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 118 [mm]
Anchor length
l
 126 [mm]
Max. usable length hef,max./hef,min.
tfix
 50/60 [mm]
Thread
Ø x length
 M 10 x 87 [mm]
Width across nut 17 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209629147 
To product variant
FBN II 12/15 Art.-No. 062915
— 
12 [mm]
105 [mm]
106 [mm]
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 105 [mm]
Anchor length
l
 106 [mm]
Max. usable length hef,max./hef,min. — 
Thread
Ø x length
 M 12 x 71 [mm]
Width across nut 19 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209629154 
To product variant
FBN II 12/45 Art.-No. 062916
— 
12 [mm]
135 [mm]
146 [mm]
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 135 [mm]
Anchor length
l
 146 [mm]
Max. usable length hef,max./hef,min. — 
Thread
Ø x length
 M 12 x 103 [mm]
Width across nut 19 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209629161 
To product variant
FBN II 12/100 Art.-No. 062917
— 
12 [mm]
190 [mm]
196 [mm]
100/115 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 190 [mm]
Anchor length
l
 196 [mm]
Max. usable length hef,max./hef,min.
tfix
 100/115 [mm]
Thread
Ø x length
 M 12 x 137 [mm]
Width across nut 19 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209629178 
To product variant
FBN II 8/10 B Art.-No. 062606
— 
8 [mm]
66 [mm]
71 [mm]
10/20 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 66 [mm]
Anchor length
l
 71 [mm]
Max. usable length hef,max./hef,min.
tfix
 10/20 [mm]
Thread
Ø x length
 M 8 x 39 [mm]
Width across nut 13 [mm]
Amount 4 Unit(s)
GTIN (EAN Code) 4006209626061 
To product variant
FBN II 16/15 K A4 Art.-No. 508745
16 [mm]
104 [mm]
120 [mm]
-/15 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 16 [mm]
Min. drill hole depth for through fixings
h2
 104 [mm]
Anchor length
l
 120 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/15 [mm]
Thread
Ø x length
 M 16 x 64 [mm]
Width across nut 24 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4048962095494 
To product variant
FBN II 12/5 K HDG Art.-No. 508014
12 [mm]
75 [mm]
86 [mm]
-/5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 75 [mm]
Anchor length
l
 86 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/5 [mm]
Thread
Ø x length
 M 12 x 39 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4048962091151 
To product variant
FBN II 10/5 K HDG Art.-No. 508013
10 [mm]
63 [mm]
71 [mm]
-/5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 63 [mm]
Anchor length
l
 71 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/5 [mm]
Thread
Ø x length
 M 10 x 31 [mm]
Width across nut 17 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4048962091144 
To product variant
FBN II 8/5 K HDG Art.-No. 508012
8 [mm]
51 [mm]
56 [mm]
-/5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 51 [mm]
Anchor length
l
 56 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/5 [mm]
Thread
Ø x length
 M 8 x 24 [mm]
Width across nut 13 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4048962091137 
To product variant
FBN II 12/5 K A4 Art.-No. 508011
12 [mm]
75 [mm]
86 [mm]
-/5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 75 [mm]
Anchor length
l
 86 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/5 [mm]
Thread
Ø x length
 M 12 x 39 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4048962091120 
To product variant

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer Bolt Anchor FBN II, FBN II A4 Type ETA-07/0211 Created 5/19/2016 Valid Till
Title ETA - European Technical Assessment (PDF, 704 KB) European Technical Assessment for fischer Bolt Anchor FBN II HDG - Torque controlled expansion anchor Type ETA-18/0101 Created 7/16/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Bolt Anchor FBN II - FBN II A4,  according European Technical Assessment ETA-07/0211 Type DoP No. 0015 Created 5/25/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 395 KB) Type DoP No. 0098 Created 7/23/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Type DoP No. 0756-CPD-0296 Created 5/23/2013 Valid Till
Title Test report (fire protection) (PDF, 1 MB) Type GS 3.2/18-082-1-r1 Created 7/3/2018 Valid Till