Bolt anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers, and ladders outside.

To all Variants
Advantages
  • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
  • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.
FBN II 10/50 Art.-No. 040855
10 [mm]
118 [mm]
126 [mm]
50/60 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 118 [mm]
Anchor length
l
 126 [mm]
Max. usable length hef,max./hef,min.
tfix
 50/60 [mm]
Thread
Ø x length
 M 10 x 86 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209408551 
To product variant
FBN II 10/30 HDG Art.-No. 507580
10 [mm]
98 [mm]
106 [mm]
30/40 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 98 [mm]
Anchor length
l
 106 [mm]
Max. usable length hef,max./hef,min.
tfix
 30/40 [mm]
Thread
Ø x length
 M 10 x 66 [mm]
Width across nut 17 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4048962087673 
To product variant
FBN II 10/30 A4 Art.-No. 507560
10 [mm]
98 [mm]
106 [mm]
30/40 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 98 [mm]
Anchor length
l
 106 [mm]
Max. usable length hef,max./hef,min.
tfix
 30/40 [mm]
Thread
Ø x length
 M 10 x 66 [mm]
Width across nut 17 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4048962087437 
To product variant
FBN II 10/30 Art.-No. 040854
10 [mm]
98 [mm]
106 [mm]
30/40 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 98 [mm]
Anchor length
l
 106 [mm]
Max. usable length hef,max./hef,min.
tfix
 30/40 [mm]
Thread
Ø x length
 M 10 x 66 [mm]
Width across nut 17 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4006209408544 
To product variant
FBN II 10/10 K Art.-No. 040947
10 [mm]
68 [mm]
76 [mm]
-/10 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 68 [mm]
Anchor length
l
 76 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/10 [mm]
Thread
Ø x length
 M 10 x 36 [mm]
Width across nut 17 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4006209409473 
To product variant
FBN II 10/5 K Art.-No. 040946
10 [mm]
63 [mm]
71 [mm]
-/5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 63 [mm]
Anchor length
l
 71 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/5 [mm]
Thread
Ø x length
 M 10 x 31 [mm]
Width across nut 17 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4006209409466 
To product variant
FBN II 8/10 K Art.-No. 040807
8 [mm]
56 [mm]
61 [mm]
-/10 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 56 [mm]
Anchor length
l
 61 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/10 [mm]
Thread
Ø x length
 M 8 x 29 [mm]
Width across nut 13 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4006209408070 
To product variant
FBN II 8/5 K Art.-No. 040806
8 [mm]
51 [mm]
56 [mm]
-/5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 51 [mm]
Anchor length
l
 56 [mm]
Max. usable length hef,max./hef,min.
tfix
 -/5 [mm]
Thread
Ø x length
 M 8 x 24 [mm]
Width across nut 13 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4006209408063 
To product variant
FBN II 20/120 Art.-No. 045576
20 [mm]
255 [mm]
277 [mm]
120/145 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 20 [mm]
Min. drill hole depth for through fixings
h2
 255 [mm]
Anchor length
l
 277 [mm]
Max. usable length hef,max./hef,min.
tfix
 120/145 [mm]
Thread
Ø x length
 M 20 x 90 [mm]
Width across nut 30 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4006209455760 
To product variant
FBN II 20/80 Art.-No. 045575
20 [mm]
215 [mm]
237 [mm]
80/105 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 20 [mm]
Min. drill hole depth for through fixings
h2
 215 [mm]
Anchor length
l
 237 [mm]
Max. usable length hef,max./hef,min.
tfix
 80/105 [mm]
Thread
Ø x length
 M 20 x 90 [mm]
Width across nut 30 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4006209455753 
To product variant
FBN II 20/60 A4 Art.-No. 507572
20 [mm]
195 [mm]
217 [mm]
60/85 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 20 [mm]
Min. drill hole depth for through fixings
h2
 195 [mm]
Anchor length
l
 217 [mm]
Max. usable length hef,max./hef,min.
tfix
 60/85 [mm]
Thread
Ø x length
 M 20 x 90 [mm]
Width across nut 30 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4048962087598 
To product variant
FBN II 20/60 Art.-No. 045574
20 [mm]
195 [mm]
217 [mm]
60/85 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 20 [mm]
Min. drill hole depth for through fixings
h2
 195 [mm]
Anchor length
l
 217 [mm]
Max. usable length hef,max./hef,min.
tfix
 60/85 [mm]
Thread
Ø x length
 M 20 x 90 [mm]
Width across nut 30 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4006209455746 
To product variant

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer Bolt Anchor FBN II, FBN II A4 Type ETA-07/0211 Created 5/19/2016 Valid Till
Title ETA - European Technical Assessment (PDF, 704 KB) European Technical Assessment for fischer Bolt Anchor FBN II HDG - Torque controlled expansion anchor Type ETA-18/0101 Created 7/16/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Bolt Anchor FBN II - FBN II A4,  according European Technical Assessment ETA-07/0211 Type DoP No. 0015 Created 5/25/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 395 KB) Type DoP No. 0098 Created 7/23/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Type DoP No. 0756-CPD-0296 Created 5/23/2013 Valid Till
Title Test report (fire protection) (PDF, 1 MB) Type GS 3.2/18-082-1-r1 Created 7/3/2018 Valid Till