Bolt anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers, and ladders outside.

To all Variants
Advantages
  • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
  • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.
FBN II 16/25 HDG Art.-No. 507598
16 [mm]
129 [mm]
145 [mm]
25/40 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 16 [mm]
Min. drill hole depth for through fixings
h2
 129 [mm]
Anchor length
l
 145 [mm]
Max. usable length hef,max./hef,min.
tfix
 25/40 [mm]
Thread
Ø x length
 M 16 x 89 [mm]
Width across nut 24 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4048962087765 
To product variant
FBN II 16/25 A4 Art.-No. 507569
16 [mm]
129 [mm]
145 [mm]
25/40 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 16 [mm]
Min. drill hole depth for through fixings
h2
 129 [mm]
Anchor length
l
 145 [mm]
Max. usable length hef,max./hef,min.
tfix
 25/40 [mm]
Thread
Ø x length
 M 16 x 89 [mm]
Width across nut 24 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4048962087567 
To product variant
FBN II 16/25 Art.-No. 045564
16 [mm]
129 [mm]
145 [mm]
25/40 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 16 [mm]
Min. drill hole depth for through fixings
h2
 129 [mm]
Anchor length
l
 145 [mm]
Max. usable length hef,max./hef,min.
tfix
 25/40 [mm]
Thread
Ø x length
 M 16 x 89 [mm]
Width across nut 24 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4006209455647 
To product variant
FBN II 16/10 A4 Art.-No. 507568
16 [mm]
114 [mm]
130 [mm]
10/25 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 16 [mm]
Min. drill hole depth for through fixings
h2
 114 [mm]
Anchor length
l
 130 [mm]
Max. usable length hef,max./hef,min.
tfix
 10/25 [mm]
Thread
Ø x length
 M 16 x 74 [mm]
Width across nut 24 [mm]
Amount 10 Unit(s)
GTIN (EAN Code) 4048962087529 
To product variant
FBN II 12/160 Art.-No. 045269
12 [mm]
245 [mm]
256 [mm]
160/175 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 245 [mm]
Anchor length
l
 256 [mm]
Max. usable length hef,max./hef,min.
tfix
 160/175 [mm]
Thread
Ø x length
 M 12 x 189 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209452691 
To product variant
FBN II 12/140 Art.-No. 045268
12 [mm]
225 [mm]
236 [mm]
140/155 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 225 [mm]
Anchor length
l
 236 [mm]
Max. usable length hef,max./hef,min.
tfix
 140/155 [mm]
Thread
Ø x length
 M 12 x 189 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209452684 
To product variant
FBN II 12/120 Art.-No. 045267
12 [mm]
205 [mm]
216 [mm]
120/135 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 205 [mm]
Anchor length
l
 216 [mm]
Max. usable length hef,max./hef,min.
tfix
 120/135 [mm]
Thread
Ø x length
 M 12 x 169 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209452677 
To product variant
FBN II 8/20 E Art.-No. 531667
— 
8 [mm]
76 [mm]
81 [mm]
20/30 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 76 [mm]
Anchor length
l
 81 [mm]
Max. usable length hef,max./hef,min.
tfix
 20/30 [mm]
Thread
Ø x length
 M 8 x 49 [mm]
Width across nut 13 [mm]
Amount — 
GTIN (EAN Code) 4048962211184 
To product variant
FBN 16/25 Art.-No. 091569
— 
16 [mm]
133 [mm]
145 [mm]
25/40 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 16 [mm]
Min. drill hole depth for through fixings
h2
 133 [mm]
Anchor length
l
 145 [mm]
Max. usable length hef,max./hef,min.
tfix
 25/40 [mm]
Thread
Ø x length
 M 16 x 89 [mm]
Width across nut 24 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209915691 
To product variant
FBN II 8/30 B Art.-No. 091547
— 
8 [mm]
86 [mm]
91 [mm]
30/40 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 86 [mm]
Anchor length
l
 91 [mm]
Max. usable length hef,max./hef,min.
tfix
 30/40 [mm]
Thread
Ø x length
 M 8 x 59 [mm]
Width across nut 13 [mm]
Amount 4 Unit(s)
GTIN (EAN Code) 4006209915479 
To product variant
FBN II 12/15 A4 Art.-No. 091564
— 
12 [mm]
105 [mm]
106 [mm]
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 105 [mm]
Anchor length
l
 106 [mm]
Max. usable length hef,max./hef,min. — 
Thread
Ø x length
 M 12 x 71 [mm]
Width across nut 19 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209915646 
To product variant
FBN II 10/35 Art.-No. 091548
— 
10 [mm]
103 [mm]
— 
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 103 [mm]
Anchor length — 
Max. usable length hef,max./hef,min. — 
Thread
Ø x length
 M 10 x 71 [mm]
Width across nut 17 [mm]
Amount 1 Unit(s)
GTIN (EAN Code) 4006209915486 
To product variant

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer Bolt Anchor FBN II, FBN II A4 Type ETA-07/0211 Created 5/19/2016 Valid Till
Title ETA - European Technical Assessment (PDF, 704 KB) European Technical Assessment for fischer Bolt Anchor FBN II HDG - Torque controlled expansion anchor Type ETA-18/0101 Created 7/16/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Bolt Anchor FBN II - FBN II A4,  according European Technical Assessment ETA-07/0211 Type DoP No. 0015 Created 5/25/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 395 KB) Type DoP No. 0098 Created 7/23/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Type DoP No. 0756-CPD-0296 Created 5/23/2013 Valid Till
Title Test report (fire protection) (PDF, 1 MB) Type GS 3.2/18-082-1-r1 Created 7/3/2018 Valid Till