Bolt anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers, and ladders outside.

To all Variants
Advantages
  • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
  • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.
FBN II 12/20 Art.-No. 044558
12 [mm]
105 [mm]
116 [mm]
20/35 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 105 [mm]
Anchor length
l
 116 [mm]
Max. usable length hef,max./hef,min.
tfix
 20/35 [mm]
Thread
Ø x length
 M 12 x 69 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209445587 
To product variant
FBN II 12/10 HDG Art.-No. 507589
12 [mm]
95 [mm]
106 [mm]
10/25 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 95 [mm]
Anchor length
l
 106 [mm]
Max. usable length hef,max./hef,min.
tfix
 10/25 [mm]
Thread
Ø x length
 M 12 x 59 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4048962087710 
To product variant
FBN II 12/10 A4 Art.-No. 507563
12 [mm]
95 [mm]
106 [mm]
10/25 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 95 [mm]
Anchor length
l
 106 [mm]
Max. usable length hef,max./hef,min.
tfix
 10/25 [mm]
Thread
Ø x length
 M 12 x 59 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4048962087468 
To product variant
FBN II 12/10 Art.-No. 040950
12 [mm]
95 [mm]
106 [mm]
10/25 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 12 [mm]
Min. drill hole depth for through fixings
h2
 95 [mm]
Anchor length
l
 106 [mm]
Max. usable length hef,max./hef,min.
tfix
 10/25 [mm]
Thread
Ø x length
 M 12 x 59 [mm]
Width across nut 19 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209409503 
To product variant
FBN II 10/160 Art.-No. 040945
10 [mm]
228 [mm]
236 [mm]
160/170 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 228 [mm]
Anchor length
l
 236 [mm]
Max. usable length hef,max./hef,min.
tfix
 160/170 [mm]
Thread
Ø x length
 M 10 x 196 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209409459 
To product variant
FBN II 10/140 Art.-No. 040944
10 [mm]
208 [mm]
216 [mm]
140/150 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 208 [mm]
Anchor length
l
 216 [mm]
Max. usable length hef,max./hef,min.
tfix
 140/150 [mm]
Thread
Ø x length
 M 10 x 176 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209409442 
To product variant
FBN II 10/100 HDG Art.-No. 507583
10 [mm]
168 [mm]
176 [mm]
100/110 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 168 [mm]
Anchor length
l
 176 [mm]
Max. usable length hef,max./hef,min.
tfix
 100/110 [mm]
Thread
Ø x length
 M 10 x 136 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4048962087697 
To product variant
FBN II 10/100 A4 Art.-No. 507562
10 [mm]
168 [mm]
176 [mm]
100/110 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 168 [mm]
Anchor length
l
 176 [mm]
Max. usable length hef,max./hef,min.
tfix
 100/110 [mm]
Thread
Ø x length
 M 10 x 136 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4048962087451 
To product variant
FBN II 10/100 Art.-No. 040943
10 [mm]
168 [mm]
176 [mm]
100/110 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 168 [mm]
Anchor length
l
 176 [mm]
Max. usable length hef,max./hef,min.
tfix
 100/110 [mm]
Thread
Ø x length
 M 10 x 136 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209409435 
To product variant
FBN II 10/70 Art.-No. 040931
10 [mm]
138 [mm]
146 [mm]
70/80 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 138 [mm]
Anchor length
l
 146 [mm]
Max. usable length hef,max./hef,min.
tfix
 70/80 [mm]
Thread
Ø x length
 M 10 x 106 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4006209409312 
To product variant
FBN II 10/50 HDG Art.-No. 507582
10 [mm]
118 [mm]
126 [mm]
50/60 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 118 [mm]
Anchor length
l
 126 [mm]
Max. usable length hef,max./hef,min.
tfix
 50/60 [mm]
Thread
Ø x length
 M 10 x 86 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4048962087680 
To product variant
FBN II 10/50 A4 Art.-No. 507561
10 [mm]
118 [mm]
126 [mm]
50/60 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 118 [mm]
Anchor length
l
 126 [mm]
Max. usable length hef,max./hef,min.
tfix
 50/60 [mm]
Thread
Ø x length
 M 10 x 86 [mm]
Width across nut 17 [mm]
Amount 20 Unit(s)
GTIN (EAN Code) 4048962087444 
To product variant

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 2 MB) European Technical Assessment for fischer Bolt Anchor FBN II, FBN II A4 Type ETA-07/0211 Created 5/19/2016 Valid Till
Title ETA - European Technical Assessment (PDF, 704 KB) European Technical Assessment for fischer Bolt Anchor FBN II HDG - Torque controlled expansion anchor Type ETA-18/0101 Created 7/16/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Bolt Anchor FBN II - FBN II A4,  according European Technical Assessment ETA-07/0211 Type DoP No. 0015 Created 5/25/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 395 KB) Type DoP No. 0098 Created 7/23/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Type DoP No. 0756-CPD-0296 Created 5/23/2013 Valid Till
Title Test report (fire protection) (PDF, 1 MB) Type GS 3.2/18-082-1-r1 Created 7/3/2018 Valid Till