Concrete screw ULTRACUT FBS II US

The high-performance concrete screw for absolute installation ease

The fischer concrete screw ULTRACUT FBS II US is a powerful anchoring solution with top installation comfort. The concrete screw with its pressed-on washer is ideal for slot fixations and the anchoring of wooden constructions as well as beams and sills. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The saw tooth geometry enables a quick and easy installation. No drill hole cleaning is required for installation in ceilings and floors. The expansion-free anchorage system enables low edge and axial spacings.

To all Variants
Advantages
  • With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.
  • The special saw tooth geometry enables fast cutting into the concrete.
  • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
  • Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
  • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
  • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
  • The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
FBS II 10x60 5/-/- US Art.-No. 536858
10 [mm]
70 [mm]
12 x 60 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
 10 [mm]
Min. drill hole depth for through fixings
h2
 70 [mm]
Screw
ds x ls
 12 x 60 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 55 / 5 [mm]
Screw-in depth with fixture thickness hnom2 / tfix - / - [mm]
Screw-in depth with fixture thickness hnom3 / tfix - / - [mm]
Drive SW 15 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962251418 
Contents — 
Type of packaging — 
To product variant
FBS II 8x130 80/65 US TX Art.-No. 536857
8 [mm]
140 [mm]
10 x 130 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 140 [mm]
Screw
ds x ls
 10 x 130 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 50 / 80 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 65 / 65 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 65 / 65 [mm]
Drive TX40/SW13 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962251401 
Contents — 
Type of packaging — 
To product variant
FBS II 8x110 60/45 US TX Art.-No. 536856
8 [mm]
120 [mm]
10 x 110 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 120 [mm]
Screw
ds x ls
 10 x 110 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 50 / 60 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 65 / 45 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 65 / 45 [mm]
Drive TX40/SW13 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962251395 
Contents — 
Type of packaging — 
To product variant
FBS II 8x100 50/35 US TX Art.-No. 536855
8 [mm]
110 [mm]
10 x 100 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 110 [mm]
Screw
ds x ls
 10 x 100 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 50 / 50 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 65 / 35 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 65 / 35 [mm]
Drive TX40/SW13 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962251388 
Contents — 
Type of packaging — 
To product variant
FBS II 8x90 40/25 US TX Art.-No. 536854
8 [mm]
100 [mm]
10 x 90 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
 8 [mm]
Min. drill hole depth for through fixings
h2
 100 [mm]
Screw
ds x ls
 10 x 90 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 50 / 40 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 65 / 25 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 65 / 25 [mm]
Drive TX40/SW13 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962251371 
Contents — 
Type of packaging — 
To product variant
Legend   =   Permission Available —  =   Permission not Available

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 5 MB) European Technical Assessment for fischer concrete screw ULTRACUT FBS II Type ETA-15/0352 Created 10/30/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 2 MB) Type DoP No. 0078 Created 4/19/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 3 MB) Type DoP No. 0146 Created 11/6/2018 Valid Till
Title DIBt, National German Approval (PDF, 1 MB) Type Z-21.8-2049 Created 7/13/2016 Valid Till 7/13/2021