Hammerset anchor EA N-D / EA II-D

The hammerset anchor for the anchoring of diamond saws and drills

The fischer hammerset anchor EA II M 12 D is an internal threaded anchor made from zinc-plated steel. It is ideally suited to the anchoring of diamond drills and saws. The anchor sleeve is reinforced so that it can bear the necessary loads. The hammerset anchor is mounted with the hammer flush to the base material. With the setting tool EHS Plus, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion.

To all Variants

Advantages

The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
Fixing point at h_ef 25 mm prevents anchor of falling out of the drill hole before being expanded.
The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

Variant

ETA-approval

Drill hole diameter

d₀

Min. drill hole depth

h₁

Anchor length

Internal thread

EA II M 12 x 50 D Art.-No. 048407

16 [mm]

54 [mm]

50 [mm]

M 12

Attributes

ETA-approval
Drill hole diameter d₀	16 [mm]
Min. drill hole depth h₁	54 [mm]
Anchor length l	50 [mm]
Internal thread A1	M 12
Min. bolt penetration l_E,min	12 [mm]
Max. bolt penetration l_E,max	22 [mm]
Amount	25 Unit(s)
GTIN (EAN Code)	4006209484074

To product variant

EA M 12 x 50 N D gvz Art.-No. 500872

—