Expansion plug M-S

The expansion plug for metric screws and threaded bolts

The fischer anchor M-S is an expansion plug made from high-quality nylon for screws and threaded rods with a metric thread. The fischer anchor M-S is ideal for fixing handless, folding shutters or downpipes in concrete, aerated concrete, solid gypsum panels and other solid and hollow building materials. The special anchor can be used in pre-installation and the time-saving push-through installation. When screwing in the screw, the M-S expands and anchors itself in the drill hole. The slimline plug geometry makes it easy to push the plug into the drill hole, for a fast and simple installation.

To all Variants
Advantages
  • The internal geometry of the M-S allows for the use of standard metric screws or threaded rods for the ideal adaptation to suit the intended use.
  • The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity.
  • As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances.
  • The slimline plug geometry makes it easy to push the plug into the drill hole, for a fast and simple installation.
Variant
Drill hole diameter
d0
Min. drill hole depth
h1
Anchor length
l
Thread
M
Amount
M 12 S Art.-No. 050155
16 [mm]
100 [mm]
80 [mm]
M 12 
10 Unit(s)

Attributes

Drill hole diameter
d0
 16 [mm]
Min. drill hole depth
h1
 100 [mm]
Anchor length
l
 80 [mm]
Thread
M
 M 12 
Amount 10 Unit(s)
GTIN (EAN Code) 4006209501559 
To product variant
M 10 S Art.-No. 050154
14 [mm]
90 [mm]
70 [mm]
M 10 
20 Unit(s)

Attributes

Drill hole diameter
d0
 14 [mm]
Min. drill hole depth
h1
 90 [mm]
Anchor length
l
 70 [mm]
Thread
M
 M 10 
Amount 20 Unit(s)
GTIN (EAN Code) 4006209501542 
To product variant
M 8 S Art.-No. 050153
10 [mm]
70 [mm]
50 [mm]
M 8 
50 Unit(s)

Attributes

Drill hole diameter
d0
 10 [mm]
Min. drill hole depth
h1
 70 [mm]
Anchor length
l
 50 [mm]
Thread
M
 M 8 
Amount 50 Unit(s)
GTIN (EAN Code) 4006209501535 
To product variant
M 6 S Art.-No. 050152
8 [mm]
55 [mm]
40 [mm]
M 6 
100 Unit(s)

Attributes

Drill hole diameter
d0
 8 [mm]
Min. drill hole depth
h1
 55 [mm]
Anchor length
l
 40 [mm]
Thread
M
 M 6 
Amount 100 Unit(s)
GTIN (EAN Code) 4006209501528 
To product variant

Additional Documents